iSens 5G

iSens use a wide range of sensor types to achieve a wide variety of configurations, allowing  up to five measured gas reading to be transmitted either to the GasVisor control panel for fast and accurate measurement of all types of gases or to cloud software. Among these sensors, we can choose Electrochemicals for oxygen and toxic gases, catalytic and infrared for flammable gases, infrared for CO2 and PID for Volatile Organic Compounds.

The iSens 5G comes prepared to be easily installed, only needing its placement at the measurement point for the electrochemical sensors as it has an internal battery for continuous use for two years. Only a 110-220 VAC plug will be required for PID and IR sensors. An iSens 5G network can be connected to a Central GasVisor LoRa, which will monitor the status of each of the detectors to indicate alarm conditions and sensor status, with a wide variety of controls, indications and options. Devices can also be monitored using Sensotral cloud software over LTE or LoRaWAN networls from a remote site.

The transmission distance on LoRa y LoRaWAN reaches up to 13 km. LoS (Line of Sight). In urban or industrial environments, this distance will be significantly reduced depending on the obstacles between the emitter and the receiver. A distance of 1 km is highly probable in normal environments. In case of loss of signal or low battery, the control panel detects the incident and alerts the user. LTE modem will avoid those restrictions anytime telephone signal will be available.